Thanks for adding me to the group! As an introduction,... here are the specs to my...

[Hans George Haemmerle]

Thanks for adding me to the group! As an introduction,... here are the specs to my current build.

Windows 10 Pro 64

AMD Threadripper 1900x
w/EKWB Monoblock
ASUS Zenith Extreme x399
w/ROG AREION 10G Ethernet Card

64GB Corsair Dominator Platinum 3200MHz
w/2x Airflow RGB Fans

2x XFX 8GB Radeon Vega 64
w/EKWB Plexi front & Nickle backs
(not yet assembled)

Avermedia Live Gamer HD 2

2x Samsung 512GB NVMe 960 Pro M.2
w/EKWB Heatsinks
Samsung 500GB 850 EVO SSD
Seagate 1TB 7mm 5400RPM HD
SilverStone 6x BD-R Slot-load Blu Ray Writer

3x Hot-Swap SSD & HD Enclosures

2x EKWB 420 SE Radiators
w/6x Corsair LL 140 RGB PWM Fans
w/Commander Pro Controler

2x Koolance 80mm x 200mm Tube Reservoirs
2x EKWB XTOP Revo D5 Water Pumps
EKWB 1/2" Soft Tubing supported with fittings from:
EKWB, Koolance and Alphacool

10x Koolance Quick-Connect Fittings (They're HUGE! I haven't figured this and drainage yet, but everything should be removable, even individual video cards, without having to drain the whole system)

Corsair HX 1000i PSU Back mounted(May need to upgade for serious overclocking)

Thermaltake Core P3 Case (Rotated 90 degrees-I/O on the bottom)

Still to be acquired: Approximately 5' of chrome 2" to 2 1/2" square tubing to create 2x 'L' frames to mount fan/rad assemblies and act as a stand.

Designed to either be oriented flat as an open workbench desktop, upright like a tower or even wall mounted.

 

[James Luckhurst]

Pics or it didn't happen

 

[Hulio Julio]

Is that all

 

[Dylan Baxendell]

soft tubing looks like poop. Go hard tubing if you're spending all that money