So I really need some help and advice! I have this build I got a new mobo and psu and...

[Jeffery Eno]

So I really need some help and advice! I have this build I got a new mobo and psu and cpu plugged all wires and everything in including gpu ram and everything else. Went to turn it on and it immediately shuts right off? All my parts are new, unless I got something DOA from Newegg. Thanks in advance!

 

[Andrew Oconnell]

NO HELP sorry but this is what puts me off doing my own build....

 

[Ben Craig]

Sounds like something is faulty, the only trouble is diagnosing what

Have u got an old pc u can take the psu out of? At least if it still does it u can rule that out

 

[Tyler Serrato]

Got your 6-8pin plugged in on the motherboard?

 

[Eric Lee Brandenburg-Mullins]

dead mobo if its for sure not the power supply like you stated.

 

[Don Eno Jr.]

Sexy case

 

[Jacob Navis]

Re put in the ram?

 

[Eric Lee Brandenburg-Mullins]

if its posting then turning off it cant be the ram, although im assuming its posting before it turns off could be wrong

 

[Dane Alfonso Miguel Cucueco]

Cmos batt?

 

[John Lim]

Did you use a cpu cable instead of pcie or vice versa

 

[Nick Stewart]

Honestly, take it all apart and rebuild it. Reseat the cpu and everything.

 

[Ερωτόκριτος Παυλάκης]

which case is that green beauty ?

 

[Džakwan Hanip]

Have you tried putting on the system outside of the case first? Like on mobo box and see if it posts?

 

[Gary Kinsley]

Hold the mem ok button for about 5 seconds

 

[Jeremy Chafin]

A lot of times it's because you have the wrong plugs in the wrong places, I've fixed several builds of people you "thought" the wires were in the right place, but 9 times out of 10 it's wires plugged into the wrong place

 

[Quinton Boffy]

I want to mount my cpu cooler that way but cant

 

[Eric Mogenson]

Can you list the parts?

 

[Jake Hallarsis]

I have the same issue before, my mobo and gpu are both 8 pins, and the one that im using for my motherboard is an 8pin meant for gpu so thats why its shutting off, works fine after i switch it with the right cable

 

[David Guinn]

this is why you do a test bench on the MB box before installing parts.

 

[Ricky Rick]

1st of all check ur psu